Skip to main content

This whole experience has left me ruined. . .

Step Four -- Cut and Assemble Interior “Ruins” on Base.

This step in the townhouse modeling process can be a bit tedious since you need to get the dimensions just right, for the outer shell of the townhouse to fit snugly (but not too much so) over the ruined base. What I’d suggest is to measure the inside of your townhouse shell, and (I hate myself for suggesting this) use the METRIC side of your ruler, so you can get precise measurements down to the last millimeter. "Metric?" you sputter. I know, I know. . .

I use ¼” thick pieces of balsa wood for these interior pieces because it approximates the look of nice solid foundation walls. By the way, these inner walls measure just under 1” high, so any 25-30mm figures placed in the ruins will just be able to peak over the walls in the heat of battle. But let’s get back to constructing the ruins. Isn't that a contradiction in terms?

Anyway, cut any pieces that will form corners with 45 degree angles, using that tiny saw and its accompanying mitre box (seen in a previous post), so the pieces fit together neatly and snugly. You might have to trim a little here and there to get everything fitted just right, for the outer shell of the townhouse to slip over your ruined base without too much trouble.


When everything has been measured, cut, tried, cursed, and trimmed a bit more, you should have a nice set of ruined interior walls that you can then glue carefully to the townhouse base. Set this aside and work on something else for a while. Once the glue has dried thoroughly, take your hobby/X-acto knife and use it to shave and/or hack away at the balsa wood until your walls begin to take on the appearance of distressed, damaged piles of rubble.


How far you choose to go here is largely a matter of taste, but I usually shoot for something akin to what you see above. You can always add some small piles of crumbled cork in the corners too, but that means you’ll have less room for your figures to occupy.


We now have our finished structure. In the next post, we’ll start to paint it, so that the townhouse looks a bit more like, well, a North German/Baltic region townhouse. Ok, zur
ück an die Arbeit männer!

Comments

old-tidders said…
Stokes,

an excellent series of posts on how you made your buildings.

looking forward to the next installment.

Allan
Anonymous said…
The use of the Jacobin metric system in the production of ruins of once-magnificent buildings is, of course, entirely appropriate.

Our Rhenish architects really do like the Hanseatic flavour of your buildings-always a pleasant relief from our local plaster-and-lathe.

Popular posts from this blog

The Eventual Anhalt-Zerbst Regiment. . .

  The Anhalt-Zerbst regiment musters in the drill square to sort themselves into platoons and companies during the coming weeks  Fall maneuvers if you will. A large dose of real life the last few days with the start of classes next Monday, various preparatory meetings, and finishing up a few other things this week.  But, I managed to sort out 60 or so Minden Austrian infantry from the pile and get 'em stuck to temporary painting bases.  Must carefully drill out the hands of several NCOs for flagpoles and pole arms this weekend before the usual basecoat.   I'm thinking of mixing the usual white gesso with the usual light gray to kill two birds with one stone so to speak.  Applying both base- and undercoat in one fell swoop as my grandmother used to say. In the meantime, the recently finished squadron of Saxon cuirassiers has been placed carefully in one of the clear acrylic boxes on my shelves until I have the suitable flag to affix.   -- Sto...

Presenting the Anspach-Bayreuth Kuirassiere!!!

Here they are, with the rearmost nine figures still drying, three squadrons of the Anspach-Bayreuth Kuirassiere, now in the service of the Grand Duchy of Stollen. And now, it's onto that artillery!

And It's the End of September!!!

  Saxony's Ploetz Cuirassiers, an illustration lifted from the Kronoskaf website, which has thus far guided my spectacularly glacial painting of 30 28mm Eureka Saxon cuirassiers purchased all the way back in October 2016. A gray, cool Saturday here in Mid-Michigan with rain in the forecast. The Grand Duchess is away at a conference, so it's just "The Boys" here at home. The Young Master (almost 15) has retreated to his room for something or other following breakfast while I have stolen back down here to Zum Stollenkeller (masquerading as my office) with a second mug of coffee and both cats comfortably ensconced nearby. Enjoying the late morning and still in my pajamas! Not much planned for today beyond designing a couple of promotional flyers for workshops my department is presenting (small parties we will throw?) in October and November.  With maybe a bit of on the next podcast script. More important,  I am toying with the idea of returning for an hour or...